The MATEKSYS PM12S-3 Power Module features 9-55V DC IN (3-12S LiPo), 3x independent Step-Down Voltage Regulators and BEC 5V, 4A continuous, 6A Peak, BEC 12V 4A continuous, 6A Peak and BEC Vx, 5.25V/6V/8V options, 15A cont., 25A Peak 1K:20K voltage divider built-in (Volt 1/21 Input voltage).

Checkout our BEC/PDB section and our Matek collection!

Specifications:

Wide 9V to 55V Operating Input Range with TVS protection
3x independent Step-Down Voltage Regulators
BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
BEC 5V (Fixed), 4A continuous
BEC 12V (Fixed), 4A continuous
1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
Current sensor signal passthrough pad
Size & Weight: 61x40x15mm, 53g

BEC Vx Specifications:

Output voltage 5.25V / 6V / 8V options.
Output voltage tolerance 1.5%
Synchronous switching step-down (or buck) regulator with typical efficiencies of 90% to 96%
Supports typical continuous output current of up to 15A, Peak current of up to 25A.
Output ripple 32mV (VIN=50V, Output 5.25V @ 15A), 43mV (VIN=50V, Output @ 5A)
Standby current: 10~20mA
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery
Tip: Input voltage >= 15V is required for continuous output current of 15A

BEC 5V Specifications:

Output voltage 5.2V, tolerance 1.5%
Supports continuous output current of up to 4A, Peak current of 6A
Output ripple 20mV (VIN=24V, Output @ 5A), 50mV (VIN=50V, Output @ 5A)
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery

BEC 12V Specifications:

Output voltage 12V, tolerance 1.5%
Supports continuous output current of up to 4A, Peak current of 6A
Output ripple 18mV (VIN=24V, Output @ 5A), 32mV (VIN=50V, Output @ 5A)
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery
Tip: Input voltage >= 13V is required for stable 12V output

Includes

1 x Matek PM12S-3 Power Module 12S Input BEC
1 x Low ESR Capacitor ZLJ 63V 390uF

Tips: If the input voltage is noisy, capacitor is required to be soldered to the input pads

Matek PM12S-3 Power Module 12S Input W/ 3x BEC